• Barajar
    Activar
    Desactivar
  • Alphabetizar
    Activar
    Desactivar
  • Frente Primero
    Activar
    Desactivar
  • Ambos lados
    Activar
    Desactivar
  • Leer
    Activar
    Desactivar
Leyendo...
Frente

Cómo estudiar sus tarjetas

Teclas de Derecha/Izquierda: Navegar entre tarjetas.tecla derechatecla izquierda

Teclas Arriba/Abajo: Colvea la carta entre frente y dorso.tecla abajotecla arriba

Tecla H: Muestra pista (3er lado).tecla h

Tecla N: Lea el texto en voz.tecla n

image

Boton play

image

Boton play

image

Progreso

1/20

Click para voltear

20 Cartas en este set

  • Frente
  • Atrás
In an ideal capacitor, is the dissipated power in it proportional to the frequency of the voltage applied across its terminals?
(Yes - No)
No
Is this a low-pass filter?
(Yes - No)
Is this a low-pass filter?
(Yes - No)
Yes
If you want to distinguish small variations of the measurand (stimulus) over time, will you look for an accurate or for a precise measurement system?
(Accurate - Precise)
Precise
Measurements from a digital multimeter produce the following values (4.001; 4.002; 4.001, 4.001). Which is the resolution uncertainty?
(±0.001 - ±0.0005)
±0.0005
In a calibrated measurement system with hysteresis, relative errors will be significant when the range of variation of the stimulus is large or when it is small?
(Large - Small)
Large
Do RCDs (diferenciales) prevent fire hazard because of overloading?
(Yes - No)
No
If it is indicated that the radius of a disk is (10.0 ± 0.1) cm, its thickness (10.0 ± 0.1) μm and its mass density 0.001 kg/m3, how many significant digits will you use to express its estimated weight from these data?
(1 - 3)
1
How you will express the result of 1.20 kg - 0.02 kg?
(1.2 - 1.18)
1.18
When performing calculations with numerical data, before reporting the result of the calculation, does it make sense to use as many digits as possible?
(Yes - No)
Yes
Would you use a temperature data logger for implementing a real-time negative feedback controller of the temperature in a room?
(Yes - No)
No
If a constant current flows through a wire, is the dissipated power in it proportional to the cross-section area of the wire?
(Yes - No)
No
A person wearing shoes touches the metallic chassis of an electrical device in which both the live and the neutral power conductors are accidentally shorted to that chassis. Which kind of hazard do you think is more likely if the protection mechanisms of the power network fail?
(Electrocution - Fire)
Fire
Do electrons flow through a capacitor?
(Yes - No)
No
In the analogy between an electrical circuit and a fluidic system, is voltage associated to pressure?
(Yes - No)
Yes
Does the capacitance between two conductors increase as distance decreases?
(Yes - No)
Yes
Measurements from system A produce the following values (4.04; 4.05; 4.07, 4.03) and measurements from system B produce the following values (4.001; 4.002; 4.001; 4.001). Can you state that system B appears to be more precise than system A?
(Yes - No)
Yes
A person is barefoot and touching the metallic chassis of an electrical device in which the neutral power conductor is accidentally shorted to that chassis. Does this situation represent a significant electrocution hazard?
(Yes - No)
No
Is saturation a source of systematic errors?
(Yes - No)
Yes
In order to minimize sparks in a switch that connects a dc source to a reactive load (L||C), will you minimize the inductance of the load (L) or its capacitance (C)?
(inductance - Capacitance)
Inductance
Is this a high-pass filter?
(Yes - No)
Is this a high-pass filter?
(Yes - No)
Yes